|
|
Arriflex BL I, II,
& III Silent 35mm cameras
|
Arri BL III
description
With
the advent of the BL III noise dampening PL front
mount, it was possible to eliminate the prime and
zoom lens blimp housings. Most BL III cameras came
with a 180° fixed shutter. A few have a 180°
variable shutter that can be adjusted to 172.8° ,
144° , or 135° . This camera utilizes a digital
tachometer and is capable of speeds of 50 fps. The
BL III has a two-pull down claw movement and
double registration pins. The BL III film
magazines have a 1mm change in the position of the
film entering the film movement chamber. BL III
magazines will work on the BL I & II, but BL I &
II magazines may not work on the BL III. Weight
with a 400' magazine, no lens, no film 13 kg...
28.5 lbs. |
|
|
***
35
BL Evolution 2000 Camera package: 35BL Camera body, Evolution
elec. 24V 35 BL Evolution Anamorphic viewfinder with Evo. glow
system, grey Incl. handle & beam splitter 80:20, N35 glow mask for,
BL-Evolution 1.85 + ground glass 1.85 with TV, Variable mirror
shutter, viewfinder extension, wide angle eyepiece & eyepiece
cup, 3 X 35 BL magazine 120m, 1 X Power cable 24 Volt, 35 BL Camera
general overhauled in grey, Glow mask BL-Evolution S
35/TV/1.85,Ground glass for BL III, Format Super 35 1.85/TV Glow
mask BL-Evolution 2.35, Ground glass for BL III ,Format Super 35
2.35, 35 BL-Evolution video assist, grey (including C-mount 1/2#11316,CEI
-Video assist Camera color V, NTSC, CEI power cable, CEI blue ring.
Two packages available.
_____________________________________________________________________
Arri BL II description
BL II cameras are serial number 35327 and above. The BL II utilizes a 180° fixed shutter, two-pull down claw movement, and double registration pins. This camera has a digital tachometer and is capable of speeds of 50 fps. The BL II is quieter than the BL I because of the two pull down claws. Circuit boards can be changed in the field because they are slotted. The motor in the BL II has almost three times the torque of the BL I. BL II cameras have internal shock mountings. Weight with a 400' magazine, no lens, no film 12.5 kg... 28. lbs.
_____________________________________________________________________
Arriflex BL
I
description
BL
I cameras are serial number 35326 and lower. The
BL I utilizes a 180° fixed shutter, four-pull down
claw movement, and double registration pins. This
camera has an analog tachometer and is capable of
speeds of 100 fps. The BL I is noisier than the BL
II because of the four pull down claws. Circuit
boards can not be changed in the field because
they are soldiered in place. The motor in the BL I
has less torque than the BL II. Weight with a 400'
magazine, no lens, no film 12.5 kg... 28. lbs.
|
